Certifications; Laser Safety - Xerox Phaser 3400 Reference Manual

Certifications

The Xerox Phaser 3400 printer and its supplies are designed and tested to meet strict
safety requirements. Follow all warnings and instructions marked on or supplied with the
product. Refer to the "User Safety Summary" section in the Phaser 3400 Personal Laser
Printer User Guide for operational safety instructions.

Laser Safety

The Xerox Phaser 3400 printer complies with safety standards, and is certified as a Class 1
Laser product under the U.S. Department of Health and Human Services (DHHS)
Radiation Performance Standard according to the Radiation Control for Health and Safety
Act of 1968. The printer does not emit hazardous laser radiation. The use of controls,
adjustments, or procedures other than those specified in the documentation might result
in hazardous exposure to laser light.
(European Union) Declaration of Conformance
The CE marking applied to this product symbolizes Xerox Ltd. Declaration of Conformity
with the following applicable Directives of the European Union as of the dates indicated:
January 1, 1995: Council Directive 73/23/EC amended by Council Directive 93/68/EC,
I
on the harmonization of the laws of the Member States related to equipment
designated for use within certain voltage limits.
January 1, 1996: Council Directive 89/336/ED, approximation of the laws of the
I
member states related to electromagnetic compatibility.
March 9, 1999: Council Directive 99/5/EC, on the harmonization of the laws of the
I
Member States related to radio and telecommunications terminal equipment.
A full declaration, defining the relevant Directives and referenced standards, can be
obtained from your Xerox Ltd. representative.
WARNING: Changes or modifications to this equipment not specifically approved by
Xerox Europe may void the user's authority to operate this equipment. Shielded cables
must be used with this equipment to maintain compliance with the EMC Directive
(89/336/EEC).
WARNING: In order to allow this equipment to operate in proximity to Industrial,
Scientific, and Medical (ISM) equipment, the external radiation from ISM equipment may
have to be limited or special mitigation measures taken.
Australia and New Zealand
Changes or modifications to this equipment not specifically approved by Fuji Xerox
Australia Pty. Limited may void the user's authority to operate this equipment. Shielded
cables must be used with this equipment to maintain compliance with the
Radiocommunications Act 1992.
Reference Guide
Certifications
19