Table of Contents
Advertisement
3.6 HP 1000 Series A, L, XL
Integrating to the Computer
3-20
GmING
STARTED
1.
Ensure 00.30
&
ID.30 driver is included in system generation.
2. Plug the HP 12009A Interface into the mainframe, then plug one
end of
the HP 12009-60002 cable into the interface, and the
other end into the socket on the rear panel of the disk
subsystem.
3. Turn the mainframe and all peripherals on. All peripherals
connected to the HP-IB bus should be turned on for the system to
operate properly.
4. Locate Technical Memo '105 1n the supplied literature, and
follow the examples to prepare the answer file for system
generation.
Advertisement
Table of Contents
