Hpl - Bering 3000 Series User Manual

3-8
GmING STARTED
3.2.3 HPL
Under HPL, only 1.2 MB (Option 201) Winchester partition is
supported. The general format for a mass storage unit specifier(msus)
is:
:[device format[select code]][,unit number]
Examples:
: J701,2
:H707,l
:M700,0
Initialize
Specifies 1 unit of 1.2
Ma,
LIF format, select code 707,
unit 12.
Specifies 1 unit of 1.2
MB,
HP9825 compatible formatj
select code 707, unit 11.
Specifies 5.25" floppy at address 0, unit 0; LIF
format.
The general format for the INIT command is as follows:
INIT msus [,interleave factor[,number of directory records]]
Example: Assumes a Model 3005 with Option 201, and initializes all
units at address 707 to LIF format.
INIT ":J707,O",22,-1
INIT 1I:J707,P,22,-1
INIT II:J707,2",22,-1
INIT ":J707,3",22,-1
[unit 0 with interleave no. 22]
{unit 1 with interleave no. 22]
[unit 2 with interleave no. 22]
[unit 3 with interleave no. 22]
Consult the Disc Programming section of the HPL Operating Manual
for other commands.