Checklist For Getting Ready - Bering 3000 Series User Manual

2.3 Checklist for Getting Ready
2-2
GmING READY
1. Copy the model, option, and serial number of your subsystem from
the rear panel to the space below for future reference.
Model No.
Opti on No. ______ - -__
Serial No.
--------
2. Connect to AC power.
3. Turn the disk subsystem on, and wait for at least one minute.
If the MAIN LED in front of the disk subsystem remains steadily
lit, it passes the self-test successfully. If it fails, goes to
Section 2.4 for detailed instruction.
4. Turn off the disk subsystem.
S. Next you will configure the disk subsystem before connecting to
the HP computer.
For Model 30xx, continue to Section 2.3.1.
For Model 33xx, 3Sxx, 38xx with Option S2x (with/without 401),
go to Section 2.3.2.
For Model 38xx with Options S3x and 401, go to Section 2.3.3.