Table of Contents
Advertisement
3.2
HP 9000 Series 200
3-2
GETTING STARTED
Series 200 computer includes HP 9816, 9826, and 9836.
The
following examples assume:
1. RAM based' system;
2. Boot ROM 3.0.
3.2.1
Basic Language
The Series 3000 disk drive requires the system has the BASIC 2.0 or
later BASIC language software package.
Boot BASIC as follows:
1. Load the System diskette into the floppy drive.
2. Turn on the computer to boot BASIC
For disk subsystem with Option 205, 210, or 215, load the BASIC
extension before continue. Follow these steps:
1.
Type LOAD BIN "AP 2_1"
2. Press EXECUTE
How to Initialize
To initialize a new disk, or re-initialize (erase all files) an old
disk, the INITIAlIZE command should be used. The format of the command
is as follows:
INITIALIZE ":equipment type, HP-IB select code and device address,
unit specifier"
Table 3.1 lists the equipment type specifiers for the disk
subsystems under different partition options.
Advertisement
Table of Contents
