Tektronix Phaser 300X User Manual page 74

4
Editing Profiles
Task
Add a point to a curve
for a finer degree of control.
Move a point on a curve to
change the position of the
point relative to other points.
Delete a point from a curve.
4-10
PhaserMatch
5.
Select a curve selection method for adjusting the points on color
curves:
Select Cyan, Magenta, or Yellow to change the relative intensities
of individual primary colors. For example, if cyan is printing too
dark on the new transfer roll, (resulting in a cyanish-black from
equal amounts of CMY) you can set the printer to print less cyan.
Select Black, CMY, or CMYK to change the relative
lightness/darkness of all colors.
6.
Select a method for editing the profile settings:
Click the Default button to return all the values to the defaults for
the base profile.
Drag points on color curves (Cyan, Magenta, Yellow, Black, CMY,
or CMYK). As you drag points on the curves, the numbers in the
edit boxes change to reflect the selected color curve and the current
values.
Modify values in the percentage edit boxes. Only the active
percentage boxes are available, the others are grayed out. To
change the active percentage points (but not the appearance of the
curves), use the Profile Preferences dialog box; see page 4-29 for
instructions.
Controlling the points on the curves
Use the following table to control the points on the color curves.
Macintosh
Click on a curve.
Click and drag a point on a curve.
Click a point on a curve to select
it, then press the Delete key.
Or,
Double-click a point on a curve.
Windows
Click on a curve with the left
mouse button.
Click and drag a point on a curve
with the left mouse button.
Click a point on a curve with the
left mouse button to select it, then
press the Delete key.
Or,
Click a point on a curve with the
right mouse button.