Tektronix Phaser 300X User Manual page 69

1.
Start the Phaser Calibrator application.
2. Select Modify Dot Gain from the Profile menu. The following
dialog box appears:
3. In the Select a base profile field, select the standard profile you
want to modify.
Or, to edit a previously saved, user-defined profile, follow these
steps:
a. Select Load Profile from the File menu.
b. Select a profile in the list and click OK.
Note The list of profiles in the Dot Gain dialog box displays the name
of the standard profile, such as Commercial Press, that was used
as the base for the modified the profile you just loaded. However,
the settings in the dialog box reflect the actual settings of the
loaded profile.
Editing Profiles
4-5
User Manual
4