Advertisement
User manual x1
USB cablex1
· Installation Requirements
1. HDMI source device (DVD, game console, PC, etc.)
2. HDMI display device (TV, projector, LED screen, etc.)
· Panel Description
1. Transmitter (TX)
①② ③④
⑦
⑧
⑨
The indicator will turn blue when the power is
①
Power indicator
turned on
a) Slow flash: waiting for connection
b) Steady on: connection successful
② WiFi indicator
c) Quick flash: SSID Pairing mode
⑤
⑥
⑩
⑦
4
a) Light off: no HDMI signal
③ Signal indicator
b) Steady on: HDMI signal is transmitting
c) Quick flash: restore factory settings
1) Light flashing: The KVM data is transmitting
④ KVM indicator
2) Steady on: The computer and the USB port are
connected
⑤ USB-A port
Connect to the computer with USB cable
a) press to switch channels
⑥ Channel switch
b) Press and hold 5s for SSID pairing
button
c) Press and hold 10s for restore factory settings
Antenna
⑦
Connect with antennas
connectors
⑧ Micro USB port
Used for firmware upgrade
⑨ HDMI input
Connect with HDMI source device with HDMI cable
Connect with local HDMI display device with HDMI
⑩ HDMI output
cable
IR out
Connect with IR blaster extension cable
Power input
Connect with DC 5V/1A power adapter
2. Receiver (RX)
①② ③ ④
⑦
⑧
⑤
⑥
⑨
⑩
⑦
5
Advertisement
