Advertisement
The indicator will turn blue when the power is
①
Power indicator
turned on
a) Slow flash: waiting for connection
② WiFi indicator
b) Steady on: connection successful
c) Quick flash: SSID Pairing mode
a) Light off: no HDMI signal
③ Signal indicator
b) Steady on: HDMI signal is transmitting
c) Quick flash: restore factory settings
1) Light flashing: The KVM data is transmitting
④ KVM indicator
2) Steady on: The mouse and the keyboard are
connected
⑤ USB-A port
Connect the mouse and the keyboard
a) After connecting with TX, press to switch channels
⑥ Channel switch
b) Press and hold 5s for SSID pairing
button
c) Press and hold 10s for restore factory settings
Antenna
⑦
Connect with antennas
connectors
⑧ Micro USB port
Used for firmware upgrade
⑨ HDMI output
Connect with HDMI display device with HDMI cable
⑩ IR in
Connect with IR receiver extension cable
Power input
Connect with DC 5V/1A power adapter
6
· Installation Procedures
1. Connection Diagrams
One to one connection
HDMI IN
USB OUT
PC
2. Connection Instructions
1) Connect the source device to the HDMI IN port of the transmitter with
an HDMI cable, and connect the HDMI OUT port of the receiver to the
display device with another HDMI cable.
2) If using the IR passback function, connect the IR blaster extension cable
into the IR OUT port of the transmitter, and connect the IR receiver
extension cable into the IR IN port of the receiver.
a: The emitter of the IR blaster extension cable should be as close as
possible to the IR receiving window of the source device.
b: Point the remote control at the receiving head of the IR receiver
extension cable to operate.
TX
RX
HDMI OUT
USB IN
HDMI Display
7
HDMI Display
Advertisement
