RS-232
④
Used for RS-232 passthrough
(GND/RXD/TXD)
Micro USB
⑤
Used for firmware upgrade
interface
⑥
IR input
Connect with IR receiver extension cable
⑦
ipcolor Rx (RJ45)
Connect with the network cable
⑧
HDMI output
Connect with HDMI display device
⑨ Power
Connect with DC5V/1A power adapter
· Installation Procedures
1. How to make a network cable
Follow the standard of IEEE-568B:
1-white and orange 2-orange 3-white and green
5-white and blue
6-green
2. Connection Diagrams
2.1 One-to-one connection
HDMI IN
Video Source
TX
4-blue
7-white and brown 8-brown
HDMI Display
HDMI OUT
CAT6/6A/7
RX
HDMI Display
7
2.2 One-to-many connection (through gigabit switch):
Video Source
HDMI Display
HDMI IN
CAT6/6A/7
Gigabit Switch
TX
2.3 One-to-many connection (cascade of gigabit switches):
HDMI OUT
RX
HDMI Display
HDMI IN
Video Source
TX
Note: It is suggested to use gigabit (1000 Mbps) switches in LAN
transmission, and 100Mbps switches should not be mixed with gigabit
switches when cascading.
HDMI OUT
RX
HDMI Display
HDMI OUT
RX
HDMI Display
HDMI OUT
RX
HDMI Display
HDMI OUT
RX
HDMI Display
CAT6/6A/7
Gigabit Switch
Gigabit Switch
HDMI OUT
HDMI Display
RX
8
*
N