Lenkeng LKV582 User Manual page 4

· Panel Description
1. Transmitter
① ③
②
⑥ ⑦
① Press to restart the device
Reset
Power indicator
The indicator will turn on when the power is
②
(blue)
turned on
1) Light off: The transmitter and the receiver
have not established a connection
2) Slow flash: The transmitter and the receiver
are connected but no video data transmission
③ Status indicator
(gigabit Ethernet)
(orange)
3) Quick flashThe transmitter and the receiver
are connected but no video data transmission
(100M Ethernet)
4) Steady on: The video data is transmitting
RS-232
④ Used for RS-232 passthrough
(GND/RXD/TXD)
Micro USB
⑤
Used for firmware upgrade
interface
④ ⑤
⑧
⑨ ⑩
5
⑥
IR output
Connect with IR blaster extension cable
⑦
HDMI input Connect with HDMI source device
⑧
HDMI out Connect with local HDMI display device
⑨
ipcolor Tx (RJ45)
Connect with the network cable
⑩
Power Connect with DC5V/1A power adapter
2. Receiver
① ③
②
⑥ ⑦
①
Press to restart the device
Reset
Power indicator
The indicator will turn on when the power is
②
(blue)
turned on
1) Light off: The transmitter and the receiver
have not established a connection
2) Slow flash: The transmitter and the receiver
are connected but no video data transmission
Status indicator
③
(gigabit Ethernet)
(orange)
3) Quick flash: The transmitter and the receiver
are connected but no video data transmission
(100M Ethernet)
4) Steady on: The video data is transmitting
④ ⑤
⑧
⑨
6