Panel Controls; Sub Source; Sub Octave - EarthQuaker Devices The Wave Transformer Manual

PANEL CONTROLS

SUB SOURCE

Selects either the internal oscillator or the
signal patched into the Shape Insert jack for
use in generating sub octaves. This control
affects the Complex, Sub Pulse and Sub Square
outputs. Leave this set to "INT" unless you
are tracking an external source.

SUB OCTAVE

Selects between 1 octave down, 2 octaves
down or muting the sub octaves. This control
affects the Complex and Sub Square outputs.
The Sub Pulse output is unaffected by this
control, as it is fixed to 1 octave down.