Table of Contents
Advertisement
INPUTS (CONT.)
μTUNE CV INPUT
Accepts +/–10 volts. This is an exponential CV
input that allows precise modulation of the
oscillator pitch. An increase in voltage of 10 volts
will increase the pitch by around 7 semitones.
This input can be used to sequence precise pitch
bends, adding pitch instability with a random
voltage source, or sequencing tiny changes in
pitch for drone or microtonal music.
This CV input is added to the Tune and Fine Tune
panel controls. Use the panel controls to set
the default pitch from which you would like to
modulate.
This input is accompanied by an inverting
attenuator that is located above the input jack.
When the associated trimmer is fully clockwise,
the CV passes unchanged to be mixed with the
panel control. When the trimmer is in the noon
position, the CV is fully attenuated. When the
trimmer is fully counterclockwise, the CV is
inverted before mixing with the panel control to
result in subtraction. µTune can be modulated
with DC control voltages and audio signals.
Advertisement
Table of Contents
