Table of Contents
Advertisement
PANEL CONTROLS (CONT.)
COMPLEX SOURCE
Selects between muting and unmuting the
source wave for the Complex output.
Leaving the source wave unmuted allows
you to hear the waveform morph from the
original wave through multiple iterations until
it reaches maximum harmonic complexity.
Muting the source waveform means that the
Complex output will be silent if the Transform
panel control is fully counterclockwise, and
no CV is present at the Transform CV input.
This allows the Transform circuit to act as a
harmonic gate/VCA. It will go from silence to
increasing in volume and harmonic complexity
as the panel control or CV input increase.
TUNE
Coarse control of the pitch of the oscillator,
spanning approximately 7 octaves.
FINE TUNE
Fine control of the pitch of the oscillator,
spanning a little more than 1 octave.
Advertisement
Table of Contents
