Table of Contents
Advertisement
OUTPUTS (CONT.)
SUB SQUARE
+/–5 volts. A sub octave square wave that is
either 1 or 2 octaves down from the source
signal, depending on the Sub Octave setting.
The source signal is selected by the Sub
Source switch. When set to "INT", the sub
octave is derived from the internal oscillator.
When set to "EXT", the sub octave is derived
from the signal that has been patched to the
Shape Insert jack.
AS IS THE SAME WITH THE SUB PULSE, WE
PURPOSELY USED AN "UNPROCESSED"
VERSION OF THIS OUTPUT, RATHER THAN ONE
THAT WAS RESHAPED USING A COMPARATOR
CIRCUIT. IT HAS A SOUND THAT IS MORE RAW
AND AGGRESSIVE.
Advertisement
Table of Contents
