Installation - Klarstein CONTEMPO Manual

EN
Position of the vent button
28

INSTALLATION

Wall drilling and bracket attachment
• Unpack the hood and check to see that all parts are in order. Make sure that
the voltage (V) and frequency (Hz) indicated on the nameplate match the
voltage and frequency at the installation location.
• Make sure the area behind the installation surface to be drilled is clear of
electrical cables or pipes.
• The stainless steel and glass surfaces of the hood can easily be damaged
during installation if struck or bumped by tools. Be sure to protect surfaces
during installation.
• Protect the cooking surface at the bottom with cardboard or similar to prevent
damage while the wall hood is being installed at the top.
Choice of ventilation mode
Exhaust air mode Recirculation mode
Exhaust air mode: Turn the
ventilation knob here to this
symbol.
Recirculation air mode: Turn
the ventilation knob here to this
symbol.