Xerox DocuPrint 180 Maintenance Manual page 18

FEEDER TRAYS
1-8
5. Remove any paper remaining in the tray and set it aside to be
placed on top of the new paper.
6. Load paper, following the instructions on the label at the front of
the feeder tray and carefully positioning the paper in the right-
front corner of the tray.
Note: The way you load the paper depends on the paper size
required by the job. For paper longer than 14 inches, load the
long edge against the back guide.
7. Slide both length guides back against the paper.
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO PERFORMING ROUTINE MAINTENANCE