Connect The Tube To The Click Screw Connection Of The Flow Through Armature - Xylem wtw DW/P Operating Manual

Maintenance and cleaning
30
4.3.3 Connect the tube to the click screw connection of the flow through arma-
ture
1
figure 4-2 Click screw connection (closed)
1. Pull out the sleeve of the click screw connection (1) until it audibly dis-
engages with a click.
1
figure 4-3 Open the click screw connection
2. Insert the tube 26 mm deep into the sleeve (1) of the click screw connection.
If the tube is not inserted deep enough, the connection will not be tight.
1
figure 4-4 Insert the tube in the sleeve
3. Press the sleeve of the click screw connection (1) against the flow through
armature until it audibly engages. The tubes are connected tightly.
1
figure 4-5 Close the click screw connection
2
1 Sleeve of the click
screw connection
(blue)
1 Sleeve of the click
screw connection
(blue)
1 Sleeve of the click
screw connection
(blue)
2 Tube
1 Sleeve of the click
screw connection
(blue)
ba77278e01 01/2024
DW/P