English User Manual Contents About this Guide..............3 FCC Statement..............3 WEEE Notice................3 CE Regulatory Notice............4 Notes on Installation.............4 Caution .................4 Introduction..............5 Features ..............5 Package Contents .............5 Product Overview ............6 Getting Started ..............7 Inserting the Memory Card........7 Installing in Vehicles ..........8 2.2.1...
3.1.2 Record all other types of videos.....12 3.1.3 Emergency Recording ......13 3.1.4 The Recording Screen......14 3.1.5 Using the LED Light........15 3.1.6 Taking Snapshot ........15 Playback Videos and Photos........16 3.2.1 Playing Videos .........17 3.2.2 Viewing Photos ........17 3.2.3 The Playback Screen........18 3.2.4 Deleting Files..........19 Adjusting the Settings..........20...
About this Guide The content in this document is for information purpose and is subject to change without prior notice. We made every effort to ensure that this User Guide is accurate and complete. However, no liability is assumed for any errors and omissions that may have occurred. The manufacturer reserves the right to change the technical specifications without prior notice.
CE Regulatory Notice This equipment complies with the requirements set out in the Council Directives on the Approximation of the Laws of the Member States relating Electromagnetic Compatibility (2004/108/EC); the Low Voltage Directive (2006/95/EC); the Restriction of The Use of Certain Hazardous Substances in Electrical And Electronic Equipment Directive (2002/95/EC), Turkish EEE Directive;...
1 Introduction Thank you for purchasing this advanced Car Recorder. This device is specifically designed for real time video and audio recording when driving. 1.1 Features Full HD camera (1920x1080 @ 30fps) 2.4” LCD color screen Wide angle lens ...
1.3 Product Overview Front View Top and Bottom Views Side (Left and Right) Views Rear View Item Item Bracket Socket Reset Button Memory Card Slot Wide Angle Lens Power Button Speaker Bracket Socket LCD Panel Microphone Up Button ( Back Button ( Down Button ( USB Connector Enter Button (...
2 Getting Started 2.1 Inserting the Memory Card Insert the memory card with the gold contacts facing the back of the device. Push the memory card until it clicks into place. To remove the memory card Push to eject the memory card out of the slot. Note: Do not remove or insert the memory card when the device is turned on.
2.2 Installing in Vehicles 2.2.1 Mount to Windshield Attach the device to the bracket base. Turn and tighten the car holder and the bracket base to make sure the device is securely locked in place. With the suction-cup laying flat, position the suction-cup on the windshield.
2.3 Connecting to Power Use only the supplied car adapter to power up the device and charge the built-in battery. Connect one end of the car adapter to the USB connector of the device. Plug the other end of the car charger to the cigarette lighter socket of your vehicle.
2.4 Powering the Device On / Off 2.4.1 Auto Power On/Off Once the vehicle engine is started, the device automatically turns on. If the Automatic Record function is enabled, the recording will automatically start right after the device turns on. See Set Automatic Recording on page 11.
2.5 Initial Settings Before using the device, we recommend you to enable the Automatic Record function and set up the correct date and time. 2.5.1 Set Automatic Recording To enable the recording to start automatically after you turn on the power, do the following: Press the button to enter the OSD menu.
3 Using the Car Recorder 3.1 Recording Videos 3.1.1 Record videos while driving When the vehicle engine starts up and the Automatic Record function is enabled, the device automatically turns on and starts recording. Recording will automatically stop when the engine is switched off. Or, press the button to stop recording manually.
3.1.3 Emergency Recording During video recording, press the button to continuously record the video in one file until the memory card storage is full or the recording is manually stopped. To stop the recording, press the button. Note: If the Collision Detection function is enabled and a collision is detected, the device will automatically trigger the emergency recording.
3.1.4 The Recording Screen Description Item Indicates the recording duration. Duration Indicates the current recording date Date and time and time. Press the button to enter the OSD Guide icon menu. (Menu) Indicates the remaining battery power. Battery Press the button to stop the Guide icon recording.
3.1.5 Using the LED Light You can use the LED light to provide extra light when the lighting is insufficient To enable the LED light, do the following: Press the button to enter the OSD menu. Press the button to select Auxiliary Light and press the button.
3.2 Playback Videos and Photos If recording is in progress, press the button to stop recording. The standby screen is displayed. Press the button to enter the OSD menu. Press the button to select the file category that you want to browse and press the button.
3.2.1 Playing Videos To play videos, do the following: If recording is in progress, press the button to stop recording. Press the button to enter the OSD menu. Press the button to select File Playback and press the button. Press the button to select Video or Emergency and press the button.
3.2.3 The Playback Screen Video Playback Screen Photo Playback Screen Description Item Date and time Indicates the recorded date and time. Press the button to return to file Guide icon selection display. (Back) Press the button to view the Guide icon previous video/photo.
3.2.4 Deleting Files To delete file(s), do the following: If recording is in progress, press the button to stop recording. Press the button to enter the OSD menu. Press the button to select File Deletion and press the button. Press the button to select the file category and press the button.
4 Adjusting the Settings 4.1 Using the Menu You can customize the video recording and other general settings via the on-screen display (OSD) menus. If recording is in progress, press the Record button to stop recording. Press the button to open the OSD menu. Press the button to select a menu option and press the button to enter the selected menu.
4.2 Menu Tree Refer to the below table for details on menu items and available menu options. Menu Description Available option option Auxiliary Enable/Disable the LED light. On / Off Light File Select the file category that Video / Emergency / Playback you want to view.
Menu Description Available option option Collision Enable/Disable the collision High Sensitivity / Detection detection. If this function is Normal Sensitivity / enabled and any collision is Low Sensitivity / off detected, the device will automatically trigger the emergency recording. Delay Set the delay duration before 10 Sec.
Specifications Item Description Image sensor 1/3.2” CMOS sensor 2592 (H) x 1944 (V) Effective pixels Storage media Support Micro SDHC, up to 32GB class 4 or above LCD display 2.4” LCD color TFT (112K pixels) Wide Angle Fixed Focus lens Lens F2.4, f=3.0mm Focus range...
Item Description Interface Mini USB, Mini C Type HDMI Battery Built-in 470mAH Li-polymer rechargeable Operating -10° ~ 60° C Temperature Operating 20 ~ 70% RH Humidity Storage -20° ~ 80° C Temperature Dimensions 67.8 x 62 x 30 mm Weight Approx.
Copyright © 2013 All rights reserved. All other marks, products or company names mentioned in this guide are trademarks of their respective companies.