Initial Settings; Set Time Zone; Set The Date / Time - HP f450x User Manual

2.6 Initial Settings

Before using the camcorder, we recommend you setup the correct Time
zone, Date and Time.
Note:
Please note that if you press the
enter OSD menu. Make sure the recording is already stopped then continue operating the menu.

2.6.1 Set Time Zone

To set the time zone, do the following:
1. Press the
2. Press the
press the
3. Press the
then press the
4. Press the
Note:
If satellite positioning is not successful, camcorder clock will run based on user defined time.

2.6.2 Set the Date / Time

To set the correct date and time, do the following:
1. Press the
2. Press the
press the
3. Press the
the
4. Repeat step 3 until the date and time setting is completed.
Note:
To ensure the accuracy of the video file time, please reset the date and time when the battery power
runs out or when not in use over 7 days.
button during recording, the system will stop recording and
button to enter the OSD menu.
button to select Set Time Zone, and then
or
button for entering function menu.
or button to set the current time zone, and
button to complete setting.
button to return to recording screen.
button to enter the OSD menu.
or
button for entering function menu.
or button to adjust the value, and then press
button to set the next field.
button to select Date / Time, and then
14