Steering; Tether Cord - BRP LYNX ADVENTURE ELECTRIC 2024 Operator's Manual

Table of Contents

Advertisement

more space to turn. Refer to the SNOWMOBILES
EQUIPPED WITH TRACTION ENHANCING PROD-
UCTS subsection of this guide to learn how to bal-
ance the grip of the ski vs the grip of the track. If the
front and rear of the snowmobile are out of balance
due to an incorrect combination of traction enhancing
products, the snowmobile may tend to oversteer or
understeer, which could lead to a loss of control.

Steering

Skis are used to steer the snowmobile with the
handlebar. The performance to steer will vary
depending on the grip of the skis on the surface.
Steering control ability may be reduced on hard-pack
snow, ice or roads. Reduce speed and allow more
space to turn. Refer to the SNOWMOBILES
EQUIPPED WITH TRACTION ENHANCING PROD-
UCTS subsection of this guide to learn how to bal-
ance the grip of the ski versus the grip of the track. If
the front and rear of the snowmobile are out of bal-
LYNX ADVENTURE ELECTRIC
ance due to an incorrect combination of traction
enhancing products, the snowmobile may tend to
oversteer or understeer, which could lead to a loss of
control.
When riding with a passenger or carrying loads, the
steering control will also be reduced. Reduce speed
and allow more space to turn.

Tether Cord

Always attach the tether cord to your riding gear
before starting the snowmobile to help ensure it
stops should the operator fall off.
After riding, always remove the tether cord from the
vehicle cut-off switch to avoid unauthorized use by
children or others and to prevent starting in a closed
environment (ex: garage).
19

Advertisement

Table of Contents
loading

Table of Contents