BRP LYNX ADVENTURE ELECTRIC 2024 Operator's Manual page 104

Table of Contents

Advertisement

VEHICLE INFORMATION
The tether cord cap must be securely snapped on
the vehicle cut-off switch to allow vehicle operation.
Pulling the tether cord cap from the switch shuts the
vehicle off.
WARNING
Always attach the tether cord eyelet to clothing
before starting the vehicle.
D.E.S.S. (Digitally Encoded Security System)
The tether cord cap has an integrated D.E.S.S. key
to provide you and your snowmobile with the equiva-
lent security of a conventional lock key.
The D.E.S.S. key contains an electronic chip which
features a unique permanently memorized digital
code.
102
Your authorized BRP snowmobile dealer has pro-
gramed the D.E.S.S. of your snowmobile to recog-
nize the D.E.S.S. key in the tether cord cap to allow
vehicle operation.
If another tether cord is used without programming
the D.E.S.S., the vehicle will start but will not allow
the high-voltage propulsion system activation.
Two D.E.S.S. keys are provided with the vehicle.
One is a Tourist key, with lower torque and a limited
top speed of 40 km/h (25 mph). The other is the
standard type key, allowing for a higher top speed of
60 km/h (37 mph).
Make sure the tether cord cap is free of dirt or snow.
D.E.S.S. Flexibility
The D.E.S.S. of your snowmobile can be pro-
grammed by your authorized BRP snowmobile dealer
to accept up to 8 different keys.

Advertisement

Table of Contents
loading

Table of Contents