BRP LYNX ADVENTURE ELECTRIC 2024 Operator's Manual page 149

Table of Contents

Advertisement

NOTICE
Whenever adjusting rear suspension, check track
tension and adjust if necessary.
Stopper Strap – SC5 120
Stopper strap length has an effect on the amount of
weight the center spring has to carry, especially dur-
ing acceleration. This affects front end uplift.
Stopper strap length also has an effect on center
spring travel.
NOTICE
Whenever stopper strap length is changed, track
tension must be checked.
LYNX ADVENTURE ELECTRIC
Action
Lighter ski pressure under
Increasing
acceleration
stopper strap
More center spring travel
length
More bump absorption capability
Heavier ski pressure under
Decreasing
acceleration
stopper strap
Less center spring travel
length
Less bump absorption capability
Stopper strap can be set to position 4, 5 and 6. The
following are illustrations for positions 4 and 6.
Smaller numbers correspond to a longer strap setting.
NOTICE
Do NOT set to a position lower than 4. It could lead
to center shock damage.
Result
NOTE:
147

Advertisement

Table of Contents
loading

Table of Contents