TP-Link RE350 Quick Installation Manual

Quick
Installation Guide
Applicable Model:
RE350
Method ONE
Using a Web Browser
Power on
Plug the extender into an electrical
outlet near your router.
Wait until the Power LED
changes to solid blue.
Configure
1
Launch a web browser and type
http://tplinkrepeater.net in the address
field. Use admin (all lowercase) for both
Username and Password to log in.
http://tplinkrepeater.net
admin
admin
Login
If the log in window does not pop up,
please refer to the FAQ > Q1.
2
Create a new username and password for
log in the web management page, then
click Confirm.
Relocate
1
Plug the extender into an electrical outlet between your router
(Host Network) and the Wi-Fi "dead" zone. The location you
choose must be within the range of your existing host network.
2
Wait until the LED is lit and solid blue. If not, relocate it closer
to the router to achieve a good (or better) signal quality.
Enjoy! Both extended networks share the same Wi-Fi passwords as those of your host networks,
but may have different SSIDs (network names) if you have customized them during the configuration.
LED Explanation
Button Explanation

Connect to the extender

For Windows Users
Not connected
Connections are available
Wireless Network Connection
TP-LINK_Extender_2.4GHz
Connect automatically Connect
√
3
Select your router's 2.4GHz or 5GHz host
network and enter the password, then click
Next.
2.4GHz Host Network Wireless Settings
5GHz Host Network
Please select 2.4GHz Host network or skip this network.
MAC Address
ID SSID Signal
1 Your router network name 30:B5:C1:33:99:76
Host 2.4GHz Password: 12345678 Next
2 TP-LINK_123456 23:B5:C0:30:90:06
Exit Other...
If your router does not support 5GHz wireless
network, please click Skip to continue.
(WPS)
Solid blue: The extender is connected to the
router, and is in a good location.
Solid red: The extender is connected to the
router, but is too far away from the router.
Blinking: WPS connection is in process.
Off: No active connection.
LED button: To turn all LEDs on or off, press the LED button.
Power button: To turn on or off the extender, press the Power button.
1. Unplug the Ethernet cable
from your computer (if any).
2. Click the Wireless
Network Connection icon
or
on your taskbar.
3. Click the refresh icon
and connect to the
extender's network:
TP-LINK_Extender_2.4GHz
or _5GHz.
1. Unplug the Ethernet cable from your computer (if any).
2. Click the Wi-Fi icon in the top right corner of the
4
You can customize the Extended 2.4GHz
and 5GHz SSIDs or keep the host network
SSIDs (default), then click Next.
2.4GHz Host Network
Summary
Extended 2.4GHz SSID:
Security
Note: The extended 2.4GHz password is the same as your Host password.
Extended 5GHz SSID:
Note: The extended 5GHz password is the same as your Host password.
Rescan Skip
5
Verify your wireless settings and click Finish.
The corresponding LEDs (
should turn solid on.
Host Network
Host Router Extender
Blue
Ideal location
2.4GHz/5GHz
On: The extender is connected to the
2.4GHz/5GHz wireless network of your host
network.
Off: No connection.
POWER
On: The extender is on.
Blinking: The extender is initializing.
Off: The extender is off.
For Mac OS X Users
Wi-Fi: On
Turn Wi-Fi Off
TP-LINK_Extender_2.4GHz
TP-LINK_Router
Join Other Network...
Create Network...
Open Network Preferences...
screen, and connect to the extender's network:
TP-LINK_Extender_2.4GHz or _5GHz.
Wireless Settings
5GHz Host Network Summary
Your network name
Copy Host SSID
Hide SSID broadcast
Your network name_5G
Copy Host SSID
Hide SSID broadcast
Back Next
/ )
Extended Network
Clients
Red
Too far away