TP-Link RE270K Quick Start Manual

AC750/AC1200
Wi-Fi Range Extender
with
Setting Up Wi-Fi Extender+ via Kasa
1 Download TP-Link Kasa from the App Store or Google Play.
OR
Scan QR Code
2 Connect your mobile device to your
3 Launch Kasa and follow the in-app instructions to expand your Wi-Fi network.
Sketch 9:41 AM 100% Sketch
Power up Start the con guration
Pull up the antenna on your Press and hold the Reset button for 5
seconds until the Status light is
Wi-Fi Extender+. Then, plug in your
extender to power it up. blinking green and amber.
N E X T
4 Connect your Wi-Fi devices to the new extended network using the same
password as the main network.
The extended network names are your main network names (SSIDs) with _EXT
or _2GEXT or _5GEXT as a suffix, depending on whether the extender is
connecting to the single-band or dual-band router. For example:
Main Router Main Router's SSIDs
2.4GHz Single-Band MyHome
5GHz Single-Band MyHome
Dual-Band MyHome_1
MyHome_2
Quick Start Guide
RE270K / RE370K
Smart Plug
Kasa
Wi-Fi network.
9:41 AM 100% Sketch 9:41 AM 100%
Great!
2.4G
5G
Status
Your extended dual-band
networks are
MyHome_1_EXT
MyHome_2_EXT
Reset
The network passwords have been
inherited from your home network's.
N E X T D O N E
Extended SSIDs
2.4GHz: MyHome_EXT
5GHz: MyHome_5GEXT
2.4GHz: MyHome_2GEXT
5GHz: MyHome_EXT
2.4GHz: MyHome_1_EXT
5GHz: MyHome_2_EXT
Support
If you encounter any issues during installation or configuration, please visit
www.tp-link.com/support for web support and troubleshooting information.
© 2016 TP-Link. All rights reserved.
Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd.
App Store is a trademark of Apple Inc.
Google Play is a trademark of Google Inc.
www.tp-link.com
DESIGNED IN CALIFORNIA. MANUFACTURED IN CHINA.
Wi-Fi Extender+
1
2
2
5
3
3
4 6
Antenna
1
Position the antenna vertically for optimal performance.
2 LED Indicators
Green: The 2.4GHz network is extended.
2.4G
Flashing green: The extender is in SoftAP mode.
Off: No 2.4GHz connection.
Green: The 5GHz network is extended.
5G
Flashing green: The extender is in SoftAP mode.
Off: No 5GHz connection.
Green: The extender is connected and in a good signal location.
Status
Red: The extender is connected, but in a poor signal location.
Flashing green rapidly: SoftAP connection is in progress.
Flashing amber and green: When pressing the Reset button for 5
seconds to trigger a Soft Reset.
Flashing amber rapidly: When pressing the Reset button for 10
seconds to factory reset the device.
Off: No active connection.
Green: The extender is plugged into an active power outlet.
Power
Flashing green: Initializing.
Flashing green rapidly: Upgrading firmware.
3 LED ON/OFF Button
Press to turn all LED Indicators ON or OFF.
4
Reset Button
Press and hold for about 5 seconds or until the Status LED starts to flash
amber and green alternately to only reset the network settings without
losing the current settings and initiate the SoftAP mode.
Press and hold for about 10 seconds or until the Status LED starts to
flash amber rapidly to reset the extender to factory defaults.
5
Socket ON/OFF Button
Press to turn the Smart Plug and its LED indicator ON or OFF.
6
Smart Plug
Plug in your electronic devices and small appliances with the input range
from 100V to 240V, and control them from the Kasa app.
Note: The input voltage should be consistent with the output voltage of the power outlet.
7
Gigabit Ethernet Port
Connect Ethernet-only (wired) devices such as Smart TVs, Blu-ray players,
and game consoles to your wireless network with Ethernet cables.
7