Applying The Configuration - urmet domus iPercom 1060 Installation And Configuration Manual

6.5 APPLYING THE CONFIGURATION

With the device setting, the configuration can be considered completed and can therefore be applied to the system.
To do so, press the Project button at the top left: the following page will appear.
Figure 26: Project Page
Press the Apply button and a dialogue window will ask if the user wants to apply the configuration to the system.
Figure 27: Confirming application of the configuration
Once the operation is confirmed by pressing OK, a window will open on the distribution status of the configuration on the system as a whole.
Figure 28: Distributing the configuration on the system
39
DS1060-182