Changing The Reversible Door - Electrolux ERT25G2HUG Instruction Manual

09 electrolux changing the reversible door

Changing the reversible door

Before you reverse the refrigerator door, you should ensure the refrigerator
is unplugged and empty and have someone to help you. During the process
screwdriver and adjustable spanner will be used.
1. Unscrew the four retaining screws of
the worktop and remove the worktop.
2. Unscrew the retaining screws of the
top bracket and remove the top
bracket. Then take away the upper
door and put it in a safe place.
3. While supporting the lower door,
remove the central bracket by unscrew
the 2 screws.
4. Take away the lower door from the
bottom hinge pin. Tilt the fridge onto
its back and rest it on a firm surface .
5. Remove the bottom bracket by
unscrewing. Remove and reverse the
adjustable foot from left side to right
side and remove the fixed screw in the
left side.
6. Remove the lower hinge pin using a
spanner. Turn the hinge bracket over
and replace it in the same slot.
Replace the bottom bracket on the
other side and lift the refrigerator
upright.
1
2
3
4
5
6
changing the reversible door electrolux 10
7. Reverse the cover. Remove the door
hinge caps on both doors (top and
bottom) and insert on the opposite
side of the door.
8. Replace the central bracket while
refitting the lower door, To assist with
final adjustment do not fully tighten the
bracket screws.
9. Unscrew the hinge pin from the top
bracket using the spanner. Turn the
bracket over and replace it in the same
slot.
10. Refit the top bracket while refitting
the upper door. Do not fully tighten
screws.
11. Check that doors are aligned
horizontally and vertically and that all
seals are closed on the cabinet before
finally tighten the central hinge and the
top bracket. Remove and reverse the
plastic insert of the worktop before refit
the worktop. Re-adjust the levelling
feet.
7
8
9
10