Table of Contents
Advertisement
Utility
Every edited sample is deleted from memory and the memory is initialized for a new editing.
(You can use it if you want to start from scratch in editing) ..
With the SAVE button you can save all the samples edited in an instrument (MS2 extension).
The instrument is saved in the INSTRUMENT folder (also in the INTERNAL HDD * if present in the instrument).
The MS2 file contains information on the instrument parameters and all samples of the split components.
The file is saved both on disk and in the flash of sounds for which the instruments (Sound Bank) remain resident
even if the instrument is switched off.
If a tool with the same name already exists in the flash it will be overwritten.
Saving takes some time proportional to the number of splits.
LOAD INSTRUMENT
Load an instrument (MS2 or SOUNDFONT) from disk and transfer it to the edit area.
By default, the INSTRUMENT folder is set.
https://www.ketron.it/images/ketron/Manuali_HTML/SD90/english/82_sample_editor.html[13/05/2020 13:55:54]
SAVING AN INSTRUMENT
Advertisement
Table of Contents
