LaunchPad
- SINGLE
: Sequence will stop automatically when it reaches the end. Pressing the pad it begins again.
- KEY MODE
this way to enter on Pad properties also.
- BEAT/BAR
On Beat mode mute is disabled on any start measure.
On Bar mode mute is removed on any start measure.
-PAD CONTROL:
among other pads.
Feature will be ignored if not assigned on pad. Reset All button restore default set "--" where pad will not operate
among other pads
CHORD MODE
-HARMONIC
-MELODIC
: Pad follows sequence as well is done without any kind of chord adaptation
Only on Melodic mode Root selection is allowed by Trnsp button
-PARALLEL/CLOSE:
(see on Style section).
https://www.ketron.it/images/ketron/Manuali_HTML/SD90/english/78_launchpad.html[13/05/2020 13:52:36]
:Pressing and holding the pad Sequence continues to play, quit pad to Stop sequence. Use
:Allows Sync between Pads when used on Play or Mute mode.
Press this button to opens a menu where you can choose how any pad can operate
Off
: To Mute pads when it play
On
: To enable Pads when it play..
: Enabled for all tables except Groove, Drum kit, Audiodrum, Wave, Harmonic/Melodic.
:Pad follows arrangements on the same way as played on keyboard style.
Only on Harmonic mode user can select Close or parallel Chord recognition