Table of Contents
Advertisement
LaunchPad
- PHRASE:
In the LaunchPad you can automate a chord sequence previously recorded by "REC CHORD"
button located at the bottom right on the display. Before starting Chord recording of the agreements specify how
many measures you would record on its "BAR" (1 to 64). Switch on the REC CHORD button and press Start. Now
you can record ( on the left part of SD 9) your own chord sequence left to harmonize the various pads according to
the properties assigned to each pad as described below (Parallel / Close Retrigger). At the end of the specific
measures SD 9 exits from recording mode and immediately starts playing the chord sequence.
Autochord On/Off enable or disable autochord mode.
- SCENE:
Submenu Scene allows to Copy , erase scenes even import tables from selected style.
- Copy To:
Copy current Scene on selected icon from Pop up menu available by press on tab.
- Clear
: Clear a whole selected Scene (even active pads) on internal memory (not from Disk)
- Import
: Very powerful utility that allows you to import entire sections from the style by choosing among
the various parts of itself. Pressing this button gives access to a selection menu of parts to import from the selected
style.
On left you can select parts of the current style.
- Select All :
Select all parts automatically
- ARR.A
: Open a menu where choose style section to import INTROS, ENDING, FILLS, ARR..
- Discard
: Discard all operations and leave this Edit menu
- OK
: Once extract leave Edit menu and combine every midi table of the style on Pad as set on previously.
https://www.ketron.it/images/ketron/Manuali_HTML/SD90/english/78_launchpad.html[13/05/2020 13:52:36]
Advertisement
Table of Contents
