Table of Contents
Advertisement
Utility
The ADD SAMPLE key activates the selection of wave files (.WAV) in the navigation area on the right.
The main navigation folder is SAMPLE.
When a WAV file is selected, the file is loaded into memory and displayed in the Sample area on the left.
You can select up to 32 samples (split).
The maximum length of a sample is established in just over 16 seconds.
The sample must be a sample rate of 44,100 samples per second mono or stereo.
In any case, an automatic resample is performed in case of different sample rates 44,100
The sample if stereo will be mixed in mono.
The Key, k.low k.high fields are automatically assigned if the reference note is found in the wav file name, or within
the wave file (chunck smpl).
If the reference note is not found in the key field, the value C3 is assigned by default.
Turning off the ADD SAMPLE box accesses the Edit menu
https://www.ketron.it/images/ketron/Manuali_HTML/SD90/english/82_sample_editor.html[13/05/2020 13:55:54]
PARAMETERS EDIT
Advertisement
Table of Contents
