Voice Mode - KETRON SD90 Instructions Manual

Voice Edit
You may set a number of properties common to all 3 Voices in the
at the bottom on the left.
In Normal mode all the Voices are overlapped regardless of the notes you play. In Duet mode, when you play a two
note chord or a chord of 3 or more notes, the First Voice plays the highest treble note, the Second Voice plays the
lowest bass note and all the other notes play all the Voices of the Layer. If you play only one note, only the First
Voice will play. The only difference between Duet 1 and Duet 2 is the acquisition and play speed of the notes. Trio
1, 2 Mode is similar to Duet but for 3 notes. Steel Mode is a specific function of Pitch Bend on the voices. Pitch
Bend affects only the lowest bass note you play and is very useful when you want simulate the playing technique of
some instruments such as the Hawaiian guitar, violin etc.
On feature such TYPE, MODE you can define assignments and operating use of these parameters.
ADR-FILTER-V-TONE
-
ATTACK
- : Sets the attack time of the sound.
DECAY
- : Sets the decay time of the sound.
RELEASE
- : Sets the release time of the sound.
RESONANCE
-
CUT OFF
- : Change the cutoff frequency
DYN FILT
- :Filter of VOICE is controlled through the dynamic.
V-TONE
- : Activates exclusively on Voice marked with the logo V. The V-Tone allows sound created with
this feature a sort of round robin timbre (ie an automatic and / or random variable timbre of the same wave). When
you apply the flag of the V-Tone on the icon inside of the Voice on which you are working (obviously if predisposed
to this function) will appear a tiny V just to indicate the activation of this feature. Meanwhile this symbol will be
displayed on the other Voices also just to show feature available.
https://www.ketron.it/images/ketron/Manuali_HTML/SD90/english/53_voice_edit.html[13/05/2020 13:48:37]
: Change the level of resonance.

VOICE MODE

field that you will find