KETRON SD90 Instructions Manual page 218

Utility
Velocity: Menu where the sample is controlled by dynamics (Velocity) and how it will react in Volume and Filter.
- Offset: Set the volume dynamics time
- Slope: Set the slope time of the volume
- Volume: Sets the time of the total volume of the edited sample.
- Filter Offset: Sets the filter compensation time
- Filter Slope: Sets the slope time of the filter
- Cut Off: Changes the cutoff frequency of the filter
A.D.S.R.
- Attack: Set the attack time of the sound envelope.
- Decay: Sets the decay time of the sound envelope.
- Sustain: Sets the time for maintaining the sound envelope.
- Release: Sets the release time of the sound envelope
It allows to assign the family of the voices in which the instrument will be displayed once edited and saved, or
alternatively if the sound is a drum set. The instrument is a GM sound with bank = 100 and pch 0-30.
To access the selection of the family there must be at least one sample in the Sample editing list.
DRUMSET: Allows to assign the instrument to the drum set.
https://www.ketron.it/images/ketron/Manuali_HTML/SD90/english/82_sample_editor.html[13/05/2020 13:55:54]
FAMILY ASSIGN