Voice Change - KETRON SD90 Instructions Manual

LaunchPad
-RETRIGGER On/Off:
Style section).
- CHORD MODE on DRUM KIT:
Pitch: Kit Pitch is allowed.
Filter: Kit Filter (open or closed) is allowed
Reso: Resonance filter is allowed when selected

-VOICE CHANGE

allowed on related menu).
-ORIGINAL VOICE
-RECORD MODE:
-RECORD BAR
when measure set is achieved
-QUANTIZE
-REAL
-4,4T,8,
Info
: Quantize feature must be set before to star recording Quantize will be applied when recording will
Stop
HOT TO RECORD:
Once Pad is select and parameters are assigned press
If Pad is already assigned as sequence a pop-up s shown if delete ( or keep) sequence recorded previously just in
case of overdub mode. (Sequence is erased only from the pad memory. It still remain available in the menu).
Here you can assign a timbre on pad to record using the Voice button Change.
https://www.ketron.it/images/ketron/Manuali_HTML/SD90/english/78_launchpad.html[13/05/2020 13:52:36]
When active sequence note will be retriggered if Chord is changed (see on
: Voice Change button allows to change voice on selected pad (Timbre selection
: Allows to restore original VOICE on sequence or Drum Kit.
User can assign a real time sequence on Active (or un active) Pad (icon show FREE).
:Allows to set recording measures ( from 1 to 32) .Record will Stop automatically
: Allows Quantize event feature before to start record:
: Real time event mean no quantize
etc: Different set of quantize available .
REC PHRASE
button.