Table of Contents
Advertisement
Steps
Place the display back-cover on a clean surface and perform the post-requisites to install the display back-cover.
Next steps
1. Install the camera.
2. Install the
display
panel.
3. Install the
display
bezel.
4. Install the
hinge
caps.
5. Install the
display
assembly.
6. Install the
WLAN
card.
7. Install the
base
cover.
8. Exit
service
mode.
9. Install the
SD
card.
10. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Enter
service
mode.
4. Remove the
base
cover.
5. Remove the
IO
board.
About this task
The following images indicate the location of the power button and provides a visual representation of the removal procedure.
after working inside your
before working inside your
computer.
computer.
Removing and installing components
71
Advertisement
Table of Contents
