Steps
1. Place the fan on the palmrest and keyboard assembly.
2. Connect the fan cable to the connector on the system board.
3. Align the screw holes on the fan to the screw holes on the palmrest and keyboard assembly.
4. Replace the two screws (M2x5) that secure the fan to the palmrest and keyboard assembly.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Power button
Removing the power button
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
IO
board.
About this task
The following images indicate the location of the power button and provides a visual representation of the removal procedure.
44
Removing and installing components
After working inside your
before working inside your
computer.
computer.