Io Board; Removing The Io Board - Dell Vostro 3400 Service Manual

Hide thumbs Also See for Vostro 3400:
Table of Contents

Advertisement

Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm rest.
2. Route the speaker cable through the routing guides on the palmrest.
3. Connect the speaker cable to the connector on the system board .
Next steps
1. Install the SSD.
2. Reconnect the
battery
3. Install the
base
cover.
4. Install the
SD
card.
5. Follow the procedure in

IO board

Removing the IO board

Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Disconnect the
battery
cable.
after working inside your
before working inside your
cable.
computer.
computer.
Disassembly and reassembly
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

P132gP132g003P132g004

Table of Contents