Table of Contents
Advertisement
Connecting the refrigerator
8 Connecting the refrigerator
A
NOTICE! Damage hazard
Lay the connection cables so that they do not come into contact with hot parts of the device or with
sharp edges.
8.1 Connecting the refrigerator to DC power supply
The electrical power supply must be connected by a qualified electrician who has demonstrated
skill and knowledge related to the construction and operation of electrical equipment and instal-
lations, and who is familiar with the applicable regulations of the country in which the equipment
is to be installed and/or used, and has received safety training to identify and avoid the hazards
involved.
!
WARNING! Electrocution hazard
Observe the recommended cable cross-sections, cable lengths and fuses.
!
CAUTION! Fire hazard
Place the fuse near the starting battery to protect the cable from short circuits and possible burning.
A
NOTICE! Damage hazard
• Do not reverse the polarity.
• To avoid voltage drops and power losses, keep the connection cable uninterrupted and as short
as possible. Do not install additional switches, plugs or socket strips.
1. Determine the required cross section of the cable in relation to the cable length (fig. j).
j
Ø/mm²
14
10
6
2
0
0
2
4
2. Connect the supply cable to the refrigerator DC terminal block (fig. k 1).
24
6
8
10
12
RUC5(x)08X, RUC6(x)08X, RUC8(x)08X
12 V
14
16
18 20 22 24 26 28
24 V
l/m
EN
Advertisement
Table of Contents
