ARC-1037
The panel PC supports various mounting options, as listed below.
◼
Wall mounting (ACC-RITYVESA-B075R, Demonstration only)
◼
Arm/ Stand mounting (ACC-ARM-D41R, Demonstration only)
◼
Panel mounting (Use LPC-10 WMB version for demonstration)
◼
VESA mounting (Screws in the package)
3.3.1
Panel Mounting
To mount the panel PC onto wall, follow the instruction below (see Figure for addition
reference).
Step 1. Insert four M4 screws into the VESA holes on the panel PC and tighten them to
secure the bracket to the rear panel, ensure that the thread depth of the screws on the rear
panel does not exceed 4mm.
Step 2. Select the location on the wall for the wall mount plate, secure the mount plate to
the wall by inserting four M5 screws into pilot holes and tightening them.
68 ARC-1037 Quick Reference Guide