Table of Contents
Advertisement
Installation Overview
AP Mounting Kit
AIR-MNT-VERT2=
AIR-MNT-ART1=
AIR-MNT-HORZ1=
AIR-ACC-PS-MNT1
(Optional)
AIR-MNT-STRAND1=
4
Mount the AP using no less than four screw holes on a bracket. For the AIR-MNT-STRAND1= bracket,
use no less than two screws.
4
9124AXI
9124AXD
N
Y
Y
Y
Y
N
Y
N
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
9124AXE
Purpose
Fixed mounting kit, allowing mounting of
both AP and power supply, for vertical
mounting on wall and for pole of diameter
2 to 5 inch (51 to 127 mm). See:
Y
Pivoted mounting kit for both vertical and
horizontal mounting, on wall or ceiling and
for pole of diameter 2 to 5 inch (51 to 127
mm). See:
Y
Fixed mounting kit, allowing mounting the
AP to mounted horizontal to the ground.
Horizontal mount to a wall or for pole of
diameter 2 to 5 inch (51mm to 127 mm).
See:
Y
Wall Mounting the AP with Horizontal Kit,
on page 55
Optional AIR-ACC-PS-MNT1 kit to mount
DC power supply. See:
DC Supply Mount Bracket, on page 59
Cable strand horizontal mount. See:
N
Strand Mounting the AP, on page 60
Choosing a Mounting Kit
39
Advertisement
Table of Contents
