Table of Contents
Advertisement
FCC Safety Compliance Statement
•
•
•
FCC Safety Compliance Statement
The FCC, with its action in ET Docket 96-8, has adopted a safety standard for human exposure to RF
electromagnetic energy emitted by FCC-certified equipment. When used with approved Cisco antennas, Cisco
Catalyst products meet the uncontrolled environmental limits found in OET-65 and ANSI C95.1, 1991. Proper
operation of this radio device according to the instructions in this publication results in user exposure
substantially below the FCC recommended limits.
Safety Precautions
For safety and to achieve a good installation, please read and follow these safety precautions:
• Select your installation site with safety as well as performance in mind. Remember: electric power lines
• Call your electric power company. Tell them your plans, and ask them to come to look at your proposed
• Plan your installation carefully and thoroughly before you begin. Successful raising of a mast or tower
• When installing the AP or its antennas, remember:
• Use a rope to lift the AP. If the assembly starts to drop, get away from it and let it fall.
• If any part of the antenna system comes in contact with a power line, do not touch it or remove it yourself.
If an accident should occur, call for qualified emergency help immediately.
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
92
Safety Precautions when Installing Antennas, on page 93
Avoiding Damage to Radios in a Testing Environment, on page 93
Performing Site Surveys, on page 94
and phone lines look alike. For safety, assume that any overhead line can kill.
installation
is mostly a matter of coordination. Each person should be assigned to a specific task and know what to
do and when to do it. One person should be in charge of the operation to issue instructions and watch
for signs of trouble.
• Do not use a metal ladder.
• Do not work on a wet or windy day.
• Do dress properly—shoes with rubber soles and heels, rubber gloves, long-sleeved shirt or jacket.
Call your local power company. They will remove it safely.
Safety Guidelines and Warnings
Advertisement
Table of Contents
