Factory-Supplied Indoor Unit Components - Hisense AHM-100HCDSAA Installation & Maintenance Manual

Table of Contents

Advertisement

BEFORE OPERATION
Be careful with the Installation and Operation manual and with
the factory-supplied accessories located besides the unit.
Two people are required when lifting because of the weight of
the unit.
4.2 FACTORY-SUPPLIED INDOOR UNIT
COMPONENTS
Accessory
Image
Wall support
Gasket
Shut-off valve
(G1")
Shut-off valve
with filter (G1")
Cable tie
Drain pipe
clamp
Drain pipe
clamp
Drain pipe
Bolts
Instruction
manual
The previous accessories are supplied inside the packing
assembly (on the top of the indoor unit).
Additional refrigerant piping (field supplied) for connections to
outdoor unit needs to be available.
If some of these accessories are not packed with the unit or
any damage to the unit is detected, please contact your dealer.
Qty.
Remarks
For hanging the unit on the
1
wall
Six gaskets for each
connections between the
6
indoor unit and shutoff
valves (inlet/outlet)
Connect at the water inlet/
1
outlet of indoor unit, used
to shut off the water flow.
Connect at the water inlet/
outlet of indoor unit, used
1
to shut off the water flow
and filter impurities in
water.
3
Used for wiring binding.
Used for fastening drain
1
hose and drain pipe.
Used for fastening drain
1
hose and drain pipe.
Used for drain hose
1
connection
Used to fix the machine to
2
the wall support
Basic instructions for the
1
installation of the device.
6

Advertisement

Table of Contents
loading

Table of Contents