Section 1: General Information & Features; General Information; Optional Accessories - Xantech SPLCD64G Installation & Programming Manual

SmartPad LCD™
Section 1: General Information & Features

GENERAL INFORMATION

The SmartPad LCD series of Touchpanel Controllers is Xantech's latest generation of the SmartPad Keypad.
The SmartPad LCD Series consists of three, interactive, touchpanel keypads – a 3.9", and a 6.4" diagonal color
graphic keypads as well as a 6.4" diagonal video keypad. All functionality and screen graphics are fully
programmable using Xantech's Universal Dragon™ software. The programming interface is via the RS232 or
USB ports located conveniently behind the detachable faceplate on the front of the unit. All Models come with
an extensive built-in IR Code Library as well as the ability to learn IR codes via the Learning Eye located on
front of the unit.
As with the previous models of SmartPad Keypads, these new touchpanels are designed to be stand-alone
controllers with the ability to output IR commands onto the standard Xantech four-wire IR Bus as well as receive
(and pass-through) IR commands via the built-in IR receiver. These new touchpanels also have the ability to
receive and transmit RS232 commands for a wide range of control options. This keypad is also directly
compatible with Xantech's MRC88 products for seamless integration with the Whole-house Audio Video
Entertainment system.
The SmartPad LCD™ Touch-Screen Panel Keypad includes the following components:
•
One SmartPad LCD Touch-Screen Panel
•
One DB9 RS232 programming cable to connect (Part No. 05913778)
•
One USB programming cable (Part No. 05913660)
•
One front panel designer Bezel (white)
•
Keypad Installation Kit which includes the keypad panel back-box enclosure, an installation template (Part
No. 09590255), 4 back-box mounting clips and touch-panel mounting screws
•
CD-ROM Disc contains the Universal Dragon Drop-IR Programming Software (Part No. 03501085-01)
•
SmartPad LCD™ Installation & Programming Instructions (Part No. 08901480)
•
Two-4 conductor WECO connector plugs (Part No. 05997400)
•
One-2 conductor WECO connector plug (Part No. 05996800)
•
4 Keypad jumpers for Zone Termination, Keypad Address and IR Sensor Enable (Part No. 06500135)
Power Supplies (not included, must be purchased separately)
•
SPLCDPS1 Powers one SPLCD
•
SPLCDPS4 Powers up to four SPLCDs

Optional Accessories

•
Optional front panel Designer Bezels:
- Almond
- Black
- Brown
- Ivory
•
RS422232 Converter (used for bi-directional RS232 communication between SmartPad LCD and other
RS232 devices
•
RS2321X8 Eight Port Serial Router
•
External IR Receivers
480 Dinky Link™ Series IR Receivers
490 Micro Link™ Series IR Receivers
780 J-Box Series IR Receiver
291 Hidden Link™ Series IR Receivers
© 2008 Xantech Corporation
Page: 7