Autobuild Wizard - Xantech SPLCD64G Installation & Programming Manual

Page: 30

AutoBuild Wizard

The AutoBuild Wizard allows you to 'build' a SPLCD Project, complete with Background, Buttons and IR and/or
RS232 Commands in just minutes. To run the AutoBuild Wizard, proceed as follows:
1. In the File Menu, select New Project or, in the Tool Bar click the New Project Icon.
2. Under Project Type, click the '+' next to SmartPad LCD.
3. Select the model SPLCD to be programmed. For example, a 64v will be used.
Select the Radio Button for AutoBuild Wizard. Click OK. Proceed as follows:
4. The AutoBuild Wizard Start-Up Screen
will appear. Click Next.
6. The Device Select Window will appear.
Select the Device (DVD, Receiver, etc)
for the device being added to the SPLCD
Project from the pull-down. Click Next.
5. The Manufacturer (Brand) Select
7. The Graphic Template Select Window
© 2008 Xantech Corporation
Window will appear. Select the Brand for
the device being added to the SPLCD
Project from the pull-down. Click Next.
will appear. In the Template File List,
select the device being added to the
SPLCD Project. Click the options for the
Template Files. They will appear in the
Preview Block. Click Next when the
desired Template has been selected.
SmartPad LCD™