Personal Protective Equipment Required; Filter Change Information , Regenerative Filter Stage (Filter Stage 1); Filter Change, Regenerative Filter Stage - deconta ME 12 Operating Instructions Manual

9.3.1

Personal protective equipment required

9.4

Filter change information , regenerative filter stage (filter stage 1)

The frequency of the filter change depends on the degree of contamination of the filters.
With increasing filter occupancy (soiling of the filters), the air performance decreases.
For filter monitoring, the filter pressure is shown via a display (filter stage 1).
We recommend changing the filters when the MAX mark is reached.
Experience shows that the service life of regenerative filters is several years under normal
load.
9.4.1

Filter change, regenerative filter stage

▪ Dismantle the cladding panel
Dust extractor ME 12
Original operating instructions
Maintenance work, including changing / removing the filters, may
only be carried out by authorised persons wearing suitable
protective clothing.
Filter monitoring
1st filter stage
(regenerative filters)
Cover plate
Maintenance
34 from 41
Version 2