Table of Contents
Advertisement
8.7
Switch on the system
▪ Switch on the main switch, make sure that the "Mains OK" lamp lights up.
▪ Switch on the "Fan" switch ("Fan active" lights up) and wait until the motor has
started up.
▪ Switch on the "cleaning" switch ("cleaning active" lights up). If an external
compressor is connected, "External compressed air" lights up.
▪ Use the rotary control "Fan control" to set the desired output of the dust extractor.
8.8
Switch off machines
Switching off the machine involves the following steps:
▪ Set the "Fan control" control dial to 0.
▪ Switch off the "cleaning" switch (switch position 0)
▪ Switch off the "fan" switch (switch position 0)
▪ Switch off the main switch).
Dust extractor ME 12
Original operating instructions
Operation
31 from 41
Version 2
Advertisement
Table of Contents
