6.4.8
Uncoupling
▪ Apply the trailer parking brake.
▪ Place the wheel chocks on the wheels.
▪ Remove the breakaway brake cable from the towing vehicle.
▪ Disconnect the lighting plug and insert it into the holder on the drawbar.
▪ Turn down the drawbar support wheel until it is firmly on the ground.
▪ Pull the clutch handle firmly upwards and release.
▪ Using the jockey wheel, raise the drawbar until the towing vehicle can be moved
away without danger.
After uncoupling from the towing vehicle, make sure that:
▪ the trailer is parked on as straight and level a surface as possible.
▪ the trailer against unintentional rolling away even on slight inclines or declines
1. is secured by the parking brake fitted to the drawbar and
2. the wheels are secured by chocks.
6.4.9
Reverse
With the automatic reversing system, reversing the trailer is possible without any problems.
In addition to the rolling resistance, a residual braking force must be overcome.
Dust extractor ME 12
Original operating instructions
Transport
24 from 41
Version 2