6.4
Regular checks and maintenance
6.4.1
Axis
After 1500 km or 6 months
▪ Check the axial play of the wheel hub bearing and have it readjusted if necessary.
Every 10000 km or 12 months
▪ Check the lining wear of the wheel brakes at the inspection hole (see Fig. 18) and
have them readjusted if necessary. The trailer brake is subject to greater wear during
continuous uphill travel. Earlier adjustment may be necessary for utility trailers.
▪ Check grease quantity and grease condition of taper roller bearings and have them
renewed if necessary.
Please
also
Fahrzeugtechnik.
Dust extractor ME 12
Original operating instructions
Have the regular checks carried out.
All maintenance work should only be carried out by trained
personnel in specialist workshops or service stations.
observe
the
corresponding
operating
instructions
Transport
from
AL-KO
19 from 41
Version 2