Table of Contents
Advertisement
6.4.5
Wheel change
▪ The trailer must stand on level, firm and non-slip ground.
▪ Use a jack to change the wheel.
▪ Before lifting the trailer, the parking brake must be firmly applied.
▪ Secure the vehicle with wheel chocks on the opposite side to prevent it from rolling
away.
▪ Only use the jack at the designated and marked points. Note the weight!
▪ Do not place under the raised trailer.
▪ The use of rims and / or tyres that are not approved for the trailer may impair road
safety.
6.4.6
Transport / trailer, support and axle load
Important for the choice of vehicle and trailer are specifications listed in the vehicle
documents and defined in the operating limits.
The specified towing capacity of the towing vehicle provides information about the maximum
weight the towing vehicle is allowed to tow.
The drawbar load indicates the force with which the drawbar of the trailer may press on the
trailer coupling of the towing vehicle. The maximum permissible drawbar load must not be
exceeded, and the minimum drawbar load must not be undercut.
The trailer may only be transported with vehicles that can demonstrate the drawbar load on
the trailer coupling specified in the operating limits.
The axle load indicates the maximum permissible load for the front and rear axle of the
towing vehicle and may not be exceeded by a trailer.
Dust extractor ME 12
Original operating instructions
1 Towable load
2 Support load
3 Axle load
Transport
22 from 41
Version 2
Advertisement
Table of Contents
