Overrun Device; Coupling Head - deconta ME 12 Operating Instructions Manual

6.4.2

Overrun device

Every 10000 - 15000 km or 12 months
▪ Lubricate or oil the sliding and joint points of the overrun device. See illustration for
lubrication points.
Please also
Fahrzeugtechnik.
6.4.3

Coupling head

Weekly or in case of obvious soiling
▪ Check the ball coupling and clean if necessary. Grease or oil the ball cup, joints and
bearing points. See illustration for lubrication points.
Please also
Fahrzeugtechnik.
Dust extractor ME 12
Original operating instructions
observe the corresponding
observe the corresponding
operating instructions
operating instructions
Transport
from AL-KO
from AL-KO
20 from 41
Version 2